Pay in installments of $5.56 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 1 - Aug 6
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
tarp and bivy setup 2P Bug Shelter for Tarp CampingThe Shelter Don't let pesky insects spoil your night. No See Um netting keeps out tiny critters, while the tub floor prevents moisture from below. This net tent for two is designed to pair with our 2P Cirriform Tarp, but it also works with larger a frame style tarps. Multiple doors allow easy entry from both sides, and the front. Multiple entry points from the front or either side. ~8" tub floor. Two interior stash pockets One interior hang loop.
The Shelter
Don't let pesky insects spoil your night. No-See-Um netting keeps out tiny critters, while the tub-floor prevents moisture from below. This net tent for two is designed to pair with our 2P Cirriform Tarp, but it also works with larger a-frame style tarps. Multiple doors allow easy entry from both sides, and the front.
- Multiple entry points from the front or either side.
- ~8" tub-floor.
- Two interior stash pockets
- One interior hang loop.
Fabric We've switched the flooring to a 20D Ripstop Polyester with a Sil/PU coating. The PU coating on the inner face significantly improves puncture resistance and reduces slipperiness over the previous 20D and 40D Silpoly offerings.
Rigging to connect the Bug Shelter to your tarp comes pre-installed. If you want to pitch the shelter without a tarp, you'll need additional guyline for the apexes and six stakes (additional guyline and stakes are not included).
We recommend seam sealing (instructions) the following seams from the inside prior to use: vertical seams at each tub corner (4), seams along the base of the tub's side walls (2). We have tested Gear Aid's Seam Grip +Sil to work with this Sil/PU fabric (not included).
Made in the USA from imported fabric.
Specifications
Shelter Weight:
- Regular Length: 430g | 15.2 oz*
- Long Length: 457g | 16.1 oz*
-
*Does not include weight of stuff sack or rigging.
- Stuff sack: 11.4g | 0.40 oz
Rigging weight:
- 12' x 3/32" shock cord: 17.6g | 0.62 oz
- 2 Mini barrel cordlocks: 1.4g | 0.05 oz
- 2 Mitten hooks: 1.8g | 0.06 oz
- 4 Squeeze hooks: 3.0g | 0.10 oz
- Total: 23.5g | 0.83 oz
Waste:
- Each net-tent produces roughly 4.1 oz (118g) of in-house waste.
Materials:
-
Floor: 20D Silpoly with Sil/PU coating
-
Finished weight: ~1.4 oz/yd2
-Hydrostatic head: >4500mm - Hydrostatic head: ~4000mm
- Coating: Sil/PU mix on outer face, PU on inner face
-
Finished weight: ~1.4 oz/yd2
- Netting: 0.6oz Nylon No-see-um
Dimensions:
- Floor length: Reg: 84" | 213cm // Long: 90" | 228.6cm
- Height at head apex: 44" | 112cm
- Front width: 56" | 142cm
- Height at foot apex: 25" | 64cm
- Rear width: 46" | 117cm
- Tub depth: ~8" | ~20cm
- Floor area: 29ft2 | 2.69m2
- Approx. packed size: 9" x 6" x 3" | 23cm x 15cm x 8cm
Required items:
No additional items are required to pair the 2P Bug Shelter with the 2P Cirriform. The same is true for pairing with most a-frame style tarps, though some setups may benefit from the use of four stakes for staking out the floor.
To pitch the Bug Shelter without a tarp, you will need the following items:
- Front Pole: At least ~46" (~117cm)
-
Rear Pole: At least ~27" (~69cm)
(taller poles are ok) - Front Guyline: ~84" (~210cm)
- Rear Guyline: ~72" (~180cm)
- Stakes: 6
Rigging/Pitching
Included rigging
Your net-tent comes with the following rigging installed. Though configured for pairing with the 2P Cirriform, the rigging will allow for pairing with many other a-frame tarps as well.
- Tops corners of tub: 24" of 3/32" shock cord & squeeze hook at each upper tub corner
- Apexes: 15" (front) & 24" (rear) 3/32" shock cord with mini barrel cordlocks & mitten hooks
Pitching under a tarp (Option 1)
This is the recommended approach for pitching under the 2P Cirriform.
- Pitch the tarp.
- Clip the Bug Shelter's apexes to points above on the tarp.
- Connect the cords at the Bug Shelter's corners to the tarp's corners.
- Adjust the cords at the apexes to raise the Bug Shelter to the desired height.
- Adjust the cords at the tub's corners to pull out the tub.
- If desired, stake the bottom corners of the tub. Otherwise, let the tub hang.
Pitching under a tarp (Option 2)
This is the recommended approach for pitching under larger a-frame tarps.
- Pitch the tarp.
- Clip the Bug Shelter's apexes to points above on the tarp.
- Adjust the cords at the apexes to raise the Bug Shelter to the desired height.
- At each tub corner, clip the squeeze hook to the tie-out at the floors bottom corner. Cord should be adjusted to its maximum length.
- At each tub corner, stake the cord that now connects the upper and lower corners so the cord forms a triangle with the upper and lower tub corners.
Pitching without a tarp
For times when you only need bug protection and no tarp.
- At each tub corner, clip the squeeze hook to the tie-out at the floors bottom corner. Cord should be adjusted to its maximum length.
- At each tub corner, stake the cord that now connects the upper and lower corners so the cord forms a triangle with the upper and lower tub corners.
- Connect a guyline to the cords at each apex.
- Stake out the apex guylines, using a pole near each end to provide height.
- Adjust the guyline length as needed using the cordlocks installed at each apex.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy